Ceiling RB-30 Make a Loop with wire

With RB-30 is possible to make a loop with wire size Φ2.0, Φ2.5 or Φ3.0 (100kg) . To use it you can insert soldered end wire into largest hole of the hardware. Turn the wire over and around a pipe or other. Than insert wire into another hole to make a loop.

PRODUCT DETAILS

Function:
Ceiling

Type :
make a loop with wire

Wire Cable Selection :
Φ2.0 (50kg), Φ2.5 (70kg), Φ3.0 (100kg)

Material:
stainless

 

INSTRUCTION:
- Do install grippers or rails into structural framework,
or use anchors as appropriate.
- Make sure the gripper is correctly aligned. Ceiling-mounted grippers should
have the pin facing down, but all others will have the pin facing up.
- Make sure to insert cable into the gripper completely before using it.
- Please do not use cables thinner than the cable diameter that is compatible.
- Do not disassemble or modify our products.
- When using a universal type, do not use it by tilting it more than the allowable angle.
Our products may be impossible to grip the cable and may
fall. Also, the cable may be broken and impossible to use.
- Make sure to check on the cable that there
is something wrong such as broken or cutting.
- Do not pull our products strongly. Ceiling equipments or
items may fall. And please note that children do not play with it.
- Do not use our products for applications such as riding
or hanging that may threaten human lives.
- Please select and use the product with allowance for safe
working load. Due to shaking and uneven
loading, unexpected load may be applied to each cable.
- Do not use our products after using overload.
The parts may be damaged and it is not possible
to obtain sufficient strength.